Together with the bathroom the kitchen is the most important room in the house to get right in design terms.

Aside from the hall the kitchen receives the highest amount of foot traffic in the home.

Most people spend a lot of time in the kitchen, especially families and if something is not right it will bug you every time you look at it.

I recommend you spend considerable time looking for free kitchen design ideas before you approach a kitchen design store. That way you will have a much more focused idea of what you are looking for and are more likely to encourage the salesperson to offer you a special deal. They will see you as a serious prospect who has spent time creating a strong vision and knows what they require.

Design ideas can be found in many places such as house and home magazines, kitchen showrooms, diy stores, kitchen web sites and friends’ houses.

You should be able to formulate at least two or three design ideas using these methods.

In the meantime here is a list of 5 popular kitchen styles that you can investigate to get you started:

Country Style

This style is also called early american or colonial and creates a lovely quaint farm kitchen look.

Typically the kitchen will feature open shelves, pot racks and a general feeling of being well lived in, accented by the various color schemes of the cabinetry.

Contemporary

This style has clean and simple lines. Cabinets are usually futuristic in look with no carvings or particularly ornate features.

The emphasis is on style and practical sophistication.

Shaker

This is a simple and utilitarian style that features flat panel doors, wooden countertops and brass hardware.

French Country

These are warm inviting kitchens full of wood and soft colors.

Natural materials feature strongly as do large furniture pieces with ornate carvings.

Arts and Crafts

This is becoming a popular style and features glass doors and natural wood tones that are finished in a matte sheen.

This style can be very artistic.

Finally, take into account the themes you have used in other rooms to ensure that the kitchen design you finally choose fits well into your overall scheme.

I hope that our free kitchen design ideas help you to get a good start in your project.

A variety of choices are available in both hard woods and other wood types. The type of wood you will choose depends on your personal preference and the décor of your home. Wood is suitable for nearly every room in your home. It may not be best in kitchens and bathrooms due to the amount of moisture found in these areas.

Choices in Wood Flooring

Hardwood remains a popular choice in wood floors. You have the choice of several different hardwoods. Popular choices include oak, cherry, hickory, maple, walnut and bellawood. These can be stained a variety of shades and tones. Consider leaving the wood in its natural color. Some hardwoods, such as walnut and cherry have a rich tone without the need for staining.

Once you have chosen the material, consider your finishing options. You may decide to purchase pre finished wood. This is already stained and protected with a clear coating. Pre finished is generally more expensive, but saves a significant amount of time.

Another option is to install the floor and then finish the wood. You will need to sand, stain and urethane the floor. After each coat, the floor will need to be sanded. This process takes several days to complete. The more coats of urethane you need the better protected the surface.

Another option is distressed or reclaimed flooring. These floors don’t have a smooth texture. However, they are beautiful and have character unlike other finishes. Another major benefit of these is they won’t show scratches as easily as urethane floors.

You have some choices other than traditional hardwood. Laminate flooring offers a choice in flooring. These are made to resemble real hardwood at a lower price. With good quality laminates, it can be difficult to tell the difference between this and real hard wood. Companies such as Armstrong flooring make high quality laminates. Other choices include cork flooring or bamboo floors.

Caring for Wood Flooring

Proper care will ensure your wood flooring has a good, long life. Whether you choose hardwood, laminate or other options, the care is basically the same.

o Sweep or vacuum the floor regularly to keep dirt and dust to a minimum. Dirt and grit on the floor wear away the surface and leave scratches in your floor.

o Use mats at the entrances to your home. This way feet can be wiped, preventing much of this dirt from entering your home in the first place.

o Lightly clean the floor when needed. If occasional mopping is needed, use a nearly dry mop. Too much water can seep between the slats and damage your floor. This can cause warping, damage the surface or cause water to become trapped under the floor. This can result in damage to the backing and mold can grow under the floor.

Regardless of the type you purchase, it’s important to follow the proper safety precautions. Always wear safety goggles when operating equipment to protect your eyes. Wear protective clothing, such as long sleeves and long pants. Proper footwear, such as work boots or strong sneakers is important for protecting your feet.

Types of Portable Air Compressors

Portable rotary screw compressors are the most commonly used air compressor. These range from 65 to 1600 cubic feet per minute. The pressure ratings vary from 100 to 350 PSI. The one you will need depends on the tools you will use. Contractors often use 185 CFM. These are strong enough to power two tools at a time. These are good for lighter and heavy duty jobs.

Truck mounted compressors can be mounted in the bed or under the hood. Under hood models are good for space saving. These use the engine of your truck for power, making them low maintenance. The downside of this is that the truck must be running to power the compressor.

Deck mounted compressors are mounted in the bed of the truck. They can be taken out and left at the job site until the job is finished. These have their own engine, so they don’t rely on your vehicle for power. They do need regular maintenance on the engine and will need fuel to power the engine.

Some compressors are electrically powered and others run on gasoline. The air is stored in the holding tank on both types. The tools are attached with a hose. The gauges on the compressor indicate the pressure, which is regulated with a valve.

Major Brands of Air Compressors

Quincy makes an excellent line of air compressor systems. Their rotary screw compressors vary from 10 to 350 horse power. These machines are reliable, durable and quiet. A wide variety is available from smaller tank models to larger, stationery cabinet styles.

Husky air compressors are generally made for home use. The 1.75 gallon tank has 135 PSI power and is good for running tools, such as sprayers, nailing guns and also is useful for insulation. They are convenient and easy to transport with a telescope handle. This model has an oil free pump for easy maintenance.

The four gallon Husky model has 125 PSI power for running small tools and spraying. This model can also be used to inflate tires and other recreational items. This model is great for the homeowner or small woodworking shop.

Types of Woodworking Jigs

Dovetail jigs are great for making dovetail joints accurately. These can be purchased relatively inexpensively. Another option is to make your own dovetail jig. You can find templates for making your own jigs on the internet or in most stores that sell wood working supplies. Many of these templates allow you to make up to twelve different size jigs.

You may want to puck up a dovetail bit for your router and a dovetail saw. These are great tools if you intend to make your own jigs. Templates allow you to make variable spaced or fixed dovetails for a variety of projects, including cabinets, drawers and small boxes. Some systems come with bits and templates together in one kit. These save money compared to purchasing the components separately.

Dovetail saws are used to cut not only dovetails, but other fine joints for projects. The blades on these saws are thinker than other saws. This allows for greater accuracy. It’s important to purchase a good quality tool for making tight joints and professional looking projects. Look for about fourteen to seventeen points per inch in a good quality saw.

A dowel jig is used for making quality, consistent dowels. If you are using a thick timber, get a self centering jig for better accuracy. There are a variety of sizes from a quarter to one half inch. Complete kits are available that include the dowel jig with several hundred dowels in a variety of sizes. Glue is sometimes included in these kits.

A kreg jig is great for cabinet making. Perfectly positioned slides are necessary if the movement in the drawer is to be smooth. Using kreg jigs save time because you won’t need to measure and mark the spaces for drawer slides. These make it easier to mount metal drawer slides. They can be used for center, bottom or extension mounted drawers. This is an inexpensive, yet versatile piece of equipment.

Making Woodworking Jigs Yourself

Making your own woodworking jigs saves money in supplies. Use inexpensive materials and scrap pieces of plywood for making your own jig. Since you use the jigs for one project only, you don’t want to spend much on materials. If you plan to re use your jigs, use a stronger hardwood to make them.

You can find instructions for making your own jigs in woodworking books or magazines. Instructions are also available on the internet. You can print these out for future reference. Consider getting a good binder to keep your jig making instructions organized in your workshop. Using plastic page covers will protect the instructions from getting dirty, ripped or damaged.

1.Start with one room at a time.
There may be the temptation, especially when moving into a new home, to decorate all of the rooms at once. This takes far too much energy and can sap your creative juices, leaving the decorating flat and less interesting. It can also make decorating your home an overwhelming task. Go slow. Do one room at a time and then move on to the next one.

2.Assess, review your needs.
With pen and paper in hand, jot down some notes about all of the windows in the room. Measure them and note their size and shape. Rough sketches will help. Are the windows too large? Too small? Odd sizes? Mismatched sizes? Is there too much light in the room? Not enough light? Do you want to block an unattractive view? Do you want to enjoy the beautiful view? Do you need privacy? Daytime privacy? Nighttime privacy? Or both? Do you want to liven up a dreary room? How do other family members feel about these needs? What is your budget for the windows?

3.Look for help, tips and ideas.
Seek inspiration. One thing is for certain, no matter what the challenge or situation that you are facing with your windows, someone else has already dealt with the same situation. There is a way, or many ways, to attractively treat the windows in your room. You can find examples of how others have decorated their windows in magazines, window decorating books, window decorating websites and by talking with friends and relatives.

4.Make a plan.
Using your list of needs, rank the needs in order of importance and then make a plan that addresses your needs in that order. There is a way to treat issue.

5.Address your window coverings in stages.
This is especially if you are uncertain about your preferences or if you are working on a budget. Begin with the shades, blinds or shutters. Once these are selected and installed, move to draperies or curtains, including the traverse or curtain rod. Finally, add the finishing touches such as cornices, decorative tie backs and finishing hardware.

6.Combine and contrast colors.
Using color in your window treatment is an excellent way to put life and energy as well as set the tone and mood of a room. Experiment with mixing colors from opposite ends of the color spectrum.

7.Mix fabrics for texture.
Fabric is composed of either natural or synthetic fibers and how they are woven, knitted or felted together. The type fiber and the weave or knitting will determine the texture of the material or fabric. Mixing fabrics and textures can be an excellent way to create interest and set the tone of your window treatments. For example, you may consider using velvet over organdy or silk over linen. Common fabrics for window treatments include brocade, cambric, canvas, chintz, cotton duck, crewel, damask, gingham, lace, linen, muslin, organdy, satin, silk, taffeta and velvet.

8.Mix patterns.
Mixing patterns can also liven up and set the mood for a room. Here are some tips for mixing patterns.

a. Match the scale, of the pattern to the area where it is going to be used. For example, use larger patterns on the drapes or curtains, medium patterns on valances or cornices and small patterns on accent pieces.

b. Use geometric patterns with one another. For example, you can use stripes with checks, plaids or dots.

c. Common colors in mixed patterns tie the two together. For example, blue stripes mixed with matching blue dots will tie the two patterns together.

9.Make small windows big.
Make big windows smaller. One of your goals should be to make the room harmonious. Mismatched windows or windows of dissimilar size and shape can disrupt this harmony. You can make small windows appear larger by placing a heading such as a valance or cornice on the wall above the window and using curtains or drapes of similar length. Large windows can be treated with a series of blinds or drapes breaking up the expanse. Large cathedral windows can be treated by installing a curtain or traverse rod on the lower part of the window and leaving the upper portion untreated.

10.Let your window coverings evolve.
Like a garden, the interior decoration of your home, including window treatments will be subject to change. Let your windows evolve as the interior of your home changes to reflect changes in your lifestyle or tastes. The first order for your windows is to provide privacy and light control. This will be accomplished with shades, blinds, miniblinds or shutters. Then you can begin creating mood with decorative treatments of color, design and texture. As you gain confidence and experience with decorating, you can change and expand your window treatments.

If you are tired of the same old boring drapery and curtains, now is the time to make a change. Follow these steps. Look for tips and ideas in books, magazines and websites. You are on your way to a complete window make over.

Here are some tips to help you begin your window coverings ( http://www.curtains-drapes-coverings.com/window-coverings.html ) makeover.

Here are 10 surefire ways to avoid the top DIY home improvement mistakes in the future and ensure success.

1. Take out the required permits — it’s amazing how many DIYers skip this step. Sure, it takes time, and it means you have to deal with the government, but it’s actually in your best interest to make sure get the required home improvement permits. The folks in the permitting office will make sure the project is done correctly and that you stay safe in the process. Also, for some projects, you’ll need proof that you have a permit or your insurance company won’t cover the improvement. You’ll probably need a permit for any project larger than wallpapering and painting. If you’re unsure, call your local building department and ask.

2. Have all the tools and materials you need available before you start your project — starting a job without the necessary tools and supplies will slow down the job and delay your progress. And make sure you buy quality tools. They’re a wise investment.

3. Prepare the job site for material deliveries — when your suppliers deliver materials, you’ll want to make sure the job site is ready to accept them. You don’t want your materials exposed to the weather while you are working and you want to have a storage area to prevent theft.

4. Don’t skimp on materials — for example, don’t use 1/4-inch drywall for building walls. Use at at least 5/8-inch; and 3/4-inch works well for a good sound barrier. Use 3/4-inch plywood for sub-floors. It creates a much stronger floor.

5. Prepare the walls for painting — clean the walls, sand them and patch any holes before you paint. Use a coat of primer or stain blocker if you’re trying to cover over oil-based paint, stains or peeling paint, or if you’re painting a lighter color over a darker color.

6. Use the correct paint — use flat paint ceilings. Interior paints should have at least an eggshell or satin finish so you can scrub it. For outdoor decks, use a linseed-oil-based stain to drive the pigment into the wood and preserve it.

7. Keep safe while working — you don’t want to end up in the emergency room. Wear safety goggles when using power tools or working with drywall or wood. Wear a hard hat when you’re working under other people on scaffolding, and open some windows when you’re painting or staining, or stripping old finishes off of floors or walls. Don’t wear loose, hanging clothing, especially when using power tools. Wear gloves when carrying wood, metal and rock, or when hammering, and wear a nail or tool pouch to prevent damage to your floors, feet, and pets.

8. Measure twice and cut once — probably the most important rule of any project. If you’re going to make a mistake, make it too long. You can always make something shorter. You can’t make it longer.

9. Know the limits of your abilities — you’re not going to be good at everything. If you don’t have a lot of experience at plumbing or electrical work, for instance, don’t attempt those projects.

10. Don’t start to learn how to do a project on your own house — If you want to learn how to do a project, offer your assistance to a friend who is an experienced DIYer or a contractor. And if you have any question about what you’re doing, make sure you stop and ask.

You probably won’t eliminate all of your DIY home improvement mistakes, but you can surely reduce them with these 10 tips.

Regardless of the type you purchase, it’s important to follow the proper safety precautions. Always wear safety goggles when operating equipment to protect your eyes. Wear protective clothing, such as long sleeves and long pants. Proper footwear, such as work boots or strong sneakers is important for protecting your feet.

Types of Portable Air Compressors

Portable rotary screw compressors are the most commonly used air compressor. These range from 65 to 1600 cubic feet per minute. The pressure ratings vary from 100 to 350 PSI. The one you will need depends on the tools you will use. Contractors often use 185 CFM. These are strong enough to power two tools at a time. These are good for lighter and heavy duty jobs.

Truck mounted compressors can be mounted in the bed or under the hood. Under hood models are good for space saving. These use the engine of your truck for power, making them low maintenance. The downside of this is that the truck must be running to power the compressor.

Deck mounted compressors are mounted in the bed of the truck. They can be taken out and left at the job site until the job is finished. These have their own engine, so they don’t rely on your vehicle for power. They do need regular maintenance on the engine and will need fuel to power the engine.

Some compressors are electrically powered and others run on gasoline. The air is stored in the holding tank on both types. The tools are attached with a hose. The gauges on the compressor indicate the pressure, which is regulated with a valve.

Major Brands of Air Compressors

Quincy makes an excellent line of air compressor systems. Their rotary screw compressors vary from 10 to 350 horse power. These machines are reliable, durable and quiet. A wide variety is available from smaller tank models to larger, stationery cabinet styles.

Husky air compressors are generally made for home use. The 1.75 gallon tank has 135 PSI power and is good for running tools, such as sprayers, nailing guns and also is useful for insulation. They are convenient and easy to transport with a telescope handle. This model has an oil free pump for easy maintenance.

The four gallon Husky model has 125 PSI power for running small tools and spraying. This model can also be used to inflate tires and other recreational items. This model is great for the homeowner or small woodworking shop.

Types of Woodworking Jigs

Dovetail jigs are great for making dovetail joints accurately. These can be purchased relatively inexpensively. Another option is to make your own dovetail jig. You can find templates for making your own jigs on the internet or in most stores that sell wood working supplies. Many of these templates allow you to make up to twelve different size jigs.

You may want to puck up a dovetail bit for your router and a dovetail saw. These are great tools if you intend to make your own jigs. Templates allow you to make variable spaced or fixed dovetails for a variety of projects, including cabinets, drawers and small boxes. Some systems come with bits and templates together in one kit. These save money compared to purchasing the components separately.

Dovetail saws are used to cut not only dovetails, but other fine joints for projects. The blades on these saws are thinker than other saws. This allows for greater accuracy. It’s important to purchase a good quality tool for making tight joints and professional looking projects. Look for about fourteen to seventeen points per inch in a good quality saw.

A dowel jig is used for making quality, consistent dowels. If you are using a thick timber, get a self centering jig for better accuracy. There are a variety of sizes from a quarter to one half inch. Complete kits are available that include the dowel jig with several hundred dowels in a variety of sizes. Glue is sometimes included in these kits.

A kreg jig is great for cabinet making. Perfectly positioned slides are necessary if the movement in the drawer is to be smooth. Using kreg jigs save time because you won’t need to measure and mark the spaces for drawer slides. These make it easier to mount metal drawer slides. They can be used for center, bottom or extension mounted drawers. This is an inexpensive, yet versatile piece of equipment.

Making Woodworking Jigs Yourself

Making your own woodworking jigs saves money in supplies. Use inexpensive materials and scrap pieces of plywood for making your own jig. Since you use the jigs for one project only, you don’t want to spend much on materials. If you plan to re use your jigs, use a stronger hardwood to make them.

You can find instructions for making your own jigs in woodworking books or magazines. Instructions are also available on the internet. You can print these out for future reference. Consider getting a good binder to keep your jig making instructions organized in your workshop. Using plastic page covers will protect the instructions from getting dirty, ripped or damaged.

1.Start with one room at a time.
There may be the temptation, especially when moving into a new home, to decorate all of the rooms at once. This takes far too much energy and can sap your creative juices, leaving the decorating flat and less interesting. It can also make decorating your home an overwhelming task. Go slow. Do one room at a time and then move on to the next one.

2.Assess, review your needs.
With pen and paper in hand, jot down some notes about all of the windows in the room. Measure them and note their size and shape. Rough sketches will help. Are the windows too large? Too small? Odd sizes? Mismatched sizes? Is there too much light in the room? Not enough light? Do you want to block an unattractive view? Do you want to enjoy the beautiful view? Do you need privacy? Daytime privacy? Nighttime privacy? Or both? Do you want to liven up a dreary room? How do other family members feel about these needs? What is your budget for the windows?

3.Look for help, tips and ideas.
Seek inspiration. One thing is for certain, no matter what the challenge or situation that you are facing with your windows, someone else has already dealt with the same situation. There is a way, or many ways, to attractively treat the windows in your room. You can find examples of how others have decorated their windows in magazines, window decorating books, window decorating websites and by talking with friends and relatives.

4.Make a plan.
Using your list of needs, rank the needs in order of importance and then make a plan that addresses your needs in that order. There is a way to treat issue.

5.Address your window coverings in stages.
This is especially if you are uncertain about your preferences or if you are working on a budget. Begin with the shades, blinds or shutters. Once these are selected and installed, move to draperies or curtains, including the traverse or curtain rod. Finally, add the finishing touches such as cornices, decorative tie backs and finishing hardware.

6.Combine and contrast colors.
Using color in your window treatment is an excellent way to put life and energy as well as set the tone and mood of a room. Experiment with mixing colors from opposite ends of the color spectrum.

7.Mix fabrics for texture.
Fabric is composed of either natural or synthetic fibers and how they are woven, knitted or felted together. The type fiber and the weave or knitting will determine the texture of the material or fabric. Mixing fabrics and textures can be an excellent way to create interest and set the tone of your window treatments. For example, you may consider using velvet over organdy or silk over linen. Common fabrics for window treatments include brocade, cambric, canvas, chintz, cotton duck, crewel, damask, gingham, lace, linen, muslin, organdy, satin, silk, taffeta and velvet.

8.Mix patterns.
Mixing patterns can also liven up and set the mood for a room. Here are some tips for mixing patterns.

a. Match the scale, of the pattern to the area where it is going to be used. For example, use larger patterns on the drapes or curtains, medium patterns on valances or cornices and small patterns on accent pieces.

b. Use geometric patterns with one another. For example, you can use stripes with checks, plaids or dots.

c. Common colors in mixed patterns tie the two together. For example, blue stripes mixed with matching blue dots will tie the two patterns together.

9.Make small windows big.
Make big windows smaller. One of your goals should be to make the room harmonious. Mismatched windows or windows of dissimilar size and shape can disrupt this harmony. You can make small windows appear larger by placing a heading such as a valance or cornice on the wall above the window and using curtains or drapes of similar length. Large windows can be treated with a series of blinds or drapes breaking up the expanse. Large cathedral windows can be treated by installing a curtain or traverse rod on the lower part of the window and leaving the upper portion untreated.

10.Let your window coverings evolve.
Like a garden, the interior decoration of your home, including window treatments will be subject to change. Let your windows evolve as the interior of your home changes to reflect changes in your lifestyle or tastes. The first order for your windows is to provide privacy and light control. This will be accomplished with shades, blinds, miniblinds or shutters. Then you can begin creating mood with decorative treatments of color, design and texture. As you gain confidence and experience with decorating, you can change and expand your window treatments.

If you are tired of the same old boring drapery and curtains, now is the time to make a change. Follow these steps. Look for tips and ideas in books, magazines and websites. You are on your way to a complete window make over.

Here are 10 surefire ways to avoid the top DIY home improvement mistakes in the future and ensure success.

1. Take out the required permits — it’s amazing how many DIYers skip this step. Sure, it takes time, and it means you have to deal with the government, but it’s actually in your best interest to make sure get the required home improvement permits. The folks in the permitting office will make sure the project is done correctly and that you stay safe in the process. Also, for some projects, you’ll need proof that you have a permit or your insurance company won’t cover the improvement. You’ll probably need a permit for any project larger than wallpapering and painting. If you’re unsure, call your local building department and ask.

2. Have all the tools and materials you need available before you start your project — starting a job without the necessary tools and supplies will slow down the job and delay your progress. And make sure you buy quality tools. They’re a wise investment.

3. Prepare the job site for material deliveries — when your suppliers deliver materials, you’ll want to make sure the job site is ready to accept them. You don’t want your materials exposed to the weather while you are working and you want to have a storage area to prevent theft.

4. Don’t skimp on materials — for example, don’t use 1/4-inch drywall for building walls. Use at at least 5/8-inch; and 3/4-inch works well for a good sound barrier. Use 3/4-inch plywood for sub-floors. It creates a much stronger floor.

5. Prepare the walls for painting — clean the walls, sand them and patch any holes before you paint. Use a coat of primer or stain blocker if you’re trying to cover over oil-based paint, stains or peeling paint, or if you’re painting a lighter color over a darker color.

6. Use the correct paint — use flat paint ceilings. Interior paints should have at least an eggshell or satin finish so you can scrub it. For outdoor decks, use a linseed-oil-based stain to drive the pigment into the wood and preserve it.

7. Keep safe while working — you don’t want to end up in the emergency room. Wear safety goggles when using power tools or working with drywall or wood. Wear a hard hat when you’re working under other people on scaffolding, and open some windows when you’re painting or staining, or stripping old finishes off of floors or walls. Don’t wear loose, hanging clothing, especially when using power tools. Wear gloves when carrying wood, metal and rock, or when hammering, and wear a nail or tool pouch to prevent damage to your floors, feet, and pets.

8. Measure twice and cut once — probably the most important rule of any project. If you’re going to make a mistake, make it too long. You can always make something shorter. You can’t make it longer.

9. Know the limits of your abilities — you’re not going to be good at everything. If you don’t have a lot of experience at plumbing or electrical work, for instance, don’t attempt those projects.

10. Don’t start to learn how to do a project on your own house — If you want to learn how to do a project, offer your assistance to a friend who is an experienced DIYer or a contractor. And if you have any question about what you’re doing, make sure you stop and ask.

You probably won’t eliminate all of your DIY home improvement mistakes, but you can surely reduce them with these 10 tips.